Robustel R3000 Lite User Guide - Manual (Page 47)

Robustel GoRugged R3000 Lite User Guide
RT_UG_R3000 Lite_v.1.0.0 23.12.2013 46 / 113
Confidential
network resource unavailable to its intended users.
Filtering @ Firewall
Item Description Default
Default Filter Policy
Select from “Accept” and “Drop”.
Accept: Router will reject all the connecting requests except the hosts which fit
the filter list.
Drop: Router will only accept the connecting requests from the hosts which fit
the filter list.
Accept
Add Filter List Click “Add” to add a filter list. Null
Action
Select from “Accept” and “Drop”.
Accept: Router will reject all the connecting requests except the hosts which fit
this filter rule.
Drop: Router will only accept the connecting requests from the hosts which fit
this filter rule.
Accept
Source IP
Defines if access is allowed from one or a range of IP addresses which are defined
by Source IP Address, or every IP addresses.
Null
Source Port
Defines if access is allowed from one or a range of port which is defined by
Source Port.
Null
Target IP Address
Defines if access is allowed to one or a range of IP addresses which are defined
by Target IP Address, or every IP addresses.
Null
Target Port
Defines if access is allowed tone or a range of port which is defined by Target
Port.
Null
Protocol
Select from “TCP”, “UDP”, “TCP&UDP”, “ICMP” or “ALL”.
If you don’t know what kinds of protocol of your application, we recommend you
select “ALL”.
Note:
TCP
Note: You can use “-“to define a range of IP addresses or ports, e.g.1.1.1.1-2.2.2.2, 10000-12000.
Note: The filtering settings should be divided into two parts. Part 1 is the Exact Filter List and Part 2 is the Default
Filter Policy. The priority of Exact Filter List is higher than Default Filter Policy. It means that while Router receive IP
packets from WAN side, it will check the Exact Filter List first, if the IP packets mismatch the Exact Filter List, then