Robustel R3000 Lite User Guide User Manual
Page 36
Robustel GoRugged R3000 Lite User Guide
RT_UG_R3000 Lite_v.1.0.0 23.12.2013 35 / 113
Confidential
Eth0@Ethernet
Item
Description
Default
IP Address, Netmask,
MTU @ LAN Interface
Set the IP address, Netmask and MTU of Eth0. These parameters will be
un-configurable if you enable Bridge.
Null
Multiple IP Address @
LAN Interface
Assign multiple IP addresses for Eth0.
Null
Enable DHCP Server @
DHCP Server
Enable to make router can lease IP address to DHCP clients which
connect to Eth0.
Enable
IP Pool Start, IP Pool End
@ DHCP Server
Define the beginning (IP Pool Start) and end (IP Pool End) of the pool of
IP addresses which will lease to DHCP clients.
192.168.0.2/
192.168.0.10
0
Netmask @ DHCP Server
Define the Netmask which the DHCP clients will obtain from DHCP
server.
255.255.255.
0
Lease Time @ DHCP
Server(min)
Define the time which the client can use the IP address which obtained
from DHCP server.
60
Primary/Secondary
Define the primary/secondary DNS Server which the DHCP clients will
192.168.0.1/