Robustel R3000 Lite User Guide - Manual (Page 84)

Robustel GoRugged R3000 Lite User Guide
RT_UG_R3000 Lite_v.1.0.0 23.12.2013 83 / 113
Confidential
RobustLink.
3.34 Configuration -> USR LED
This section allows users to change the display status of USR LED.
Note: Please refer to “Status” -> “System” -> “LEDs Information” -> “USR”.
USR LED
Item Description Default
USR LED Type Select from “VPN”, “PPPoE”, “DynDNS” and “GPS”. VPN
Indication
Select from “ON”, “Blink”.
For example, if “USR LED Type” is set as “VPN” and “Indication” is set as “Blink”,
when any VPN tunnel is up USR LED will blink.
ON
3.35 Administration -> Profile
This section allows users to import or export the configuration file, and restore the router to factory default setting.