Robustel R3000 Lite User Guide - Manual (Page 51)

Robustel GoRugged R3000 Lite User Guide
RT_UG_R3000 Lite_v.1.0.0 23.12.2013 50 / 113
Confidential
Speed”, and the maximum rate can reach to 100% of “Downlink Speed”.
IP Address @ QoS IP
Control List
Enter IP address of the user (for example, PC) who you want to set it with QoS
Control. Router supports up to 20 users set with QoS IP Control. If want to
control one network segment, user can set “IP Address” as format “x.x.x.x/24” or
“x.x.x.x/255.255.255.0”. For example, if we to control network segment “172.16.
x.x”, we can set “172.16.0.0/16” or “172.16.0.0/255.255.0.0” in “IP Address”.
Null
Priority @ QoS IP
Control List
Select from “Exempt”, “Premium”, “Express”, “Normal” and “Bulk”.
Select the priority of the user (for example, PC) who you want to set it with QoS
Control.
Exempt: this is the highest priority which guarantees that the minimum global
rate of router is 50% of “Downlink Speed”, and the maximum rate can reach to
100% of “Downlink Speed”.
Premium: guarantees that the minimum global rate of router is 25% of “Downlink
Speed”, and the maximum rate can reach to 100% of “Downlink Speed”.
Express: guarantees that the minimum global rate of router is 15% of “Downlink
Speed”, and the maximum rate can reach to 100% of “Downlink Speed”.
Normal: guarantees that the minimum global rate of router is 10% of “Downlink
Speed”, and the maximum rate can reach to 100% of “Downlink Speed”.
Bulk: guarantees that the minimum global rate of router is 1% of “Downlink
Speed”, and the maximum rate can reach to 100% of “Downlink Speed”.
Exempt
Service Name @ QoS
Service Control List
Set server name of the service that you want to set it with QoS Control. Router
supports up to 20 users set with QoS Service Control. Priority of QoS Service
Control is higher than that of both QoS IP control and QoS MAC control.
Null
Protocol @ QoS
Service Control List
Select from “TCP”, “UDP” and “TCP&UDP”. TCP
Port @ Service
Control List
Enter the port number of the service that you want to set it with QoS Control. Null
Priority @ QoS Service
Control List
Select from “Exempt”, “Premium”, “Express”, “Normal” and “Bulk”.
Select the priority of the service that you want to set it with QoS Control.
Exempt: this is the highest priority which guarantees that the minimum global
rate of router is 50% of “Downlink Speed”, and the maximum rate can reach to
100% of “Downlink Speed”.
Premium: guarantees that the minimum global rate of router is 25% of “Downlink
Speed”, and the maximum rate can reach to 100% of “Downlink Speed”.
Express: guarantees that the minimum global rate of router is 15% of “Downlink
Speed”, and the maximum rate can reach to 100% of “Downlink Speed”.
Normal: guarantees that the minimum global rate of router is 10% of “Downlink
Speed”, and the maximum rate can reach to 100% of “Downlink Speed”.
Bulk: guarantees that the minimum global rate of router is 1% of “Downlink
Speed”, and the maximum rate can reach to 100% of “Downlink Speed”.
Exempt
Note: If services are in the same priority level, router will automatically start Stochastic Fairness Queueing (SFQ)
strategy to make a fair bandwidth allocation.