Sensaphone Express II - Manual (Page 13)

11
Chapter 2: Installation
CHAPTER 2: INSTALLATION
This chapter provides the information necessary to install the Sensaphone ® Express II. Correctly
installing the unit will ensure proper functioning and maximum service life. Please read the
entire chapter before attempting installation.
Within the packaging is a Warranty Registration card. Please take the time to fill this out and
mail it. The Limited 1 Year Warranty is explained on the last page of this manual.
OPERATING ENVIRONMENT
Express II should be mounted and operated in a safe environment. Do not mount the unit where
it will be subject to shock and vibration. The temperature range the Express II can operate
in is 32°F to 130°F (0°C to 55°C). If you require Express II to operate in a below freezing
environment, you must take safe and practical measures to keep the unit’s temperature above
32°F or it will not operate reliably.
CAUTION: Express II is a sensitive electronic device. Personnel and work area should be
grounded before handling this device. Do not install Express II near strong electrostatic,
electromagnetic, magnetic or radioactive fields. Do not expose it to fumes or corrosive vapors.
MOUNTING Express II
When you receive Express II, carefully remove it from the box. On the top and bottom of the
enclosure are mounting holes to attach the unit to either a panel or wall. The mounting surface
should be sturdy enough to support 15 lbs. The unit should be mounted using four #12-24 bolts
where appropriate, or four #12 tapping screws. When mounting the unit to a wall make sure
the mounting screws fully engage a solid member, (e.g. a stud), of the support structure. Mount
Express II in an upright position so that you can easily gain access to the front panel. There
must be a power outlet and telephone jack nearby. The dimensions of the full enclosure are:
14.50"H x 13.06"W x 8.31"D. See Figure 1.
Figure 1: Mounting dimensions