Talos Security DR1600 Series DVR User Manual - Manual (Page 14)

14
Click and drag the cursor to adjust settings. Click "APPLY" to save the parameters
3.4.2.2 RECORD SETUP
Click " RECORD " on the main menu to enter into the record settings interface.
CH01~CH04: Click to select the channel to change settings.
RECORD: Open: Channel recoding enabled, Close: Channel recording disabled.
BITRATE: Click to select the bitrate for best data compression.
RESOLUTION: Click to select the resolution of recorded video: D1; 720 x 480, Half D1; 720 x 240,
CIF; 352 x 288
FRAME RATE: Click to select the recoded frame rate.
AUDIO: Not applicable
MODE: Always: DVR will begin recording at startup, Schedule: DVR will record by a set schedule.
PACK TIME: Four options; 15min, 30min, 45min, 60min, this breaks video recoding into more
manageable chapters.
SCHEDULE SETUP: See below for detailed information.