Talos Security DR1600 Series DVR User Manual - Manual (Page 29)

29
REBOOT: Click to restart the DVR. This is common after making important system changes.
POWER OFF: Click to shut down the DVR
.
4 NETWORK OPERATION
4.1
USE CLIENT SOFTWARE TO OPERATE THE DVR FROM YOUR PC
With the DVR connected to your network the Client Software allows you to operate the DVR from
your PC.
4.1.1
Install NVClient software
The Client Software can be found on the CD included in the accessory box.
4.1.1.1
Load the CD into your CD/DVD drive and open the "CMS" file folder.
Double click "NVCL…" to install the Client Software.
A shortcut will be placed on your desktop, double click to launch NVClient.
NOTE: Full instructions for use of NVClient can be found on the CD in the "CMS" file folder.