Talos Security DR1600 Series DVR User Manual - Manual (Page 47)

47
PTZ SETTING
Click "PTZ Setting" to enter the Pan Tilt Zoom camera setting interface.
Channe allows you to assign the settings to a specific camera and DVR channel.
Protocol allows you to select the control language the DVR will use to communicate with the camera.
Address allows you to match the DVR channel and camera; DVR and camera address must match.
Buad Rate allows you to set the rate at which information is transmitted from the DVR to the camera.
Data Bit allows you to set the size of each "character" transmitted from the DVR to the camera.
Stop Bit allows you to set the bit that marks the end of a character transmitted from the DVR.
Verify allows equipped cameras to communicate receipt of a direction to the DVR.
NETWORK SETTING
Click "Network Setting" to enter the network settings interface.
Basic Attributes
Type allows you to select the network connection you will use with your DVR; DHCP or Static.
IP Address allows you to set a specific address on your network.
Preferred DNS allows you to use the DVR with an external IP address and Domain Name Service.
Media Port is the port on your router the DVR uses to transmit a video stream.
Gateway is the address of your router on your network.
MAC is the specific identity of the DVR allowing devices to find it on a network.
Netmask is the address of the DVR on a sub-group of your network.
Web Port is the port on your router the DVR uses to receive requests from the internet.
PPPoE
PPPOE Enable allows you to turn PPPoE ON or OFF.
User Name is the name used to access the DVR by PPPoE.
Password is the password used to access the DVR by PPPoE.
DDNS
DDNS Enable turns DDNS ON or OFF.
Service allows you to select the DDNS service you are using.
Host Name is the host name you created when you opened your DDNS account.
User Name is the user name you created when you opened your DDNS account.
Password is the password you created when you opened your DDNS account.