Talos Security DK1400 Series Surveillance Kit User Manual User Manual
Page 24
24
MOBILE
Click "MOBILE" to enter the mobile phone settings interface. You will need a smart phone with web
access and a data plan to use this option.
USER NAME: Enter the user name used to logo into the DVR; for example "admin".
PASSWORD: Enter the password used to log into the DVR; 519070 is the default.
SERVER PORT: Enter the port number for mobile view. This port must be forwarded in your router.
Please note that the DVR server port is not the same value as the mobile server port.
NETWORK: Select the mobile network; 2.5G, 2.7G, 3G or WIFI.
MOTION DETECT
Click "MOTION" to enter the motion detection settings interface.
CHN: Select the channel to set up and enable motion detection.
SENSITIVITY: Set the sensitivity level; highest, high, middle, and low. If you receive a lot of false
motion recordings set to lower sensitivity.
AREA: Set the coverage area to be monitored for motion; red means monitored, transparent means
not monitored.