Talos Security DK1400 Series Surveillance Kit User Manual - Manual (Page 34)

34
4.2.2 Set up the DVR for access using a dynamic domain name service
4.2.2.1 Network settings
TYPE: Select "Static" to set your preferred DVR IP address on your network.
PORT: This is the out-bound port for video transmission; enter 7777.
WEB PORT: This is the in-bound contact port for HTTP. The normal value is 80, if your ISP blocks
80 you will need to select a different port number like 8081.
IP ADDRESS: Set an IP address and press "Enter". Address should not conflict with automatically
assigned addresses (DHCP) from the router, I.E.: 192.168.1.222
NETMASK: Enter the Netmask settings; this is normally a default setting.
GATEWAY: Enter the Gateway settings; this is the address of your router on your network.,
I.E.:192.168.1.1
4.2.2.2 DDNS settings
DDNS Setup: In the Network Setup Menu click "DDNS Setup".
DDNS: Select "Open" to use a Dynamic Domain Name Service with the DVR.
SERVICE: Select "dyndns" as your DDNS service.
HOST NAME: Input the host name you created when you opened your DDNS account.
USERNAME: Input the user name you created when you opened your DDNS account.
PASSWORD: Input the password you created when you opened your DDNS account.