Talos Security DK1400 Series Surveillance Kit User Manual - Manual (Page 28)

28
SYSTEM INFORMATION
Click "INFORMATION" to enter the system information setting interface; displays system hardware
features and firmware version, including: Device ID, Software Version and MAC Address.
SYSTEM MAINTAINANCE
Click on "MAINTAIN" to enter the system maintenance setting interface.
AUTO MAINTAIN: Click to set the DVR for auto maintenance. Close turns off auto maintenance,
Open turns on auto maintenance and allows you to schedule regular system reboots.
UPDATE: Click to start a software update; on a flash drive create a folder called "dvrupgrade" and
copy the software update to that folder. Insert the flash drive into the USB port on the DVR and press
"Enter". The system will begin the software update and will display the message below.