Talos Security DK1400 Series Surveillance Kit User Manual - Manual (Page 37)

37
4.2.3.4 Setup tab
It ahs been our experience that some systems might require the DDNS setup in the router, if this is the
case with your system, use these instructions.
Click: Setup tab
Click: DDNS tab
Select: dynDNS.org
Username: Enter your DDNS user name
Password: Enter your DDNS password
Host Name: Enter your DDNS host name, I.E.: talosdvr.dyndns.tv
Click: Update
4.2.4 NVClient
Load NVClient software onto a remote PC connected to the internet. Follow the instruction beginning
at 4.1.1 titled "Install NVClient software"
4.2.4.1 Launch NVClient from the shortcut on the PC desktop
4.2.5 Local
setup
Click "Local Setup" to enter into the server settings interface.
Server Manage: Under the server manage tab click on "Add" to enter the Add Server menu.
Server Type: Click to choose the DVR server type; select 37DVR.
Address: Enter the (DDNS) host name of the DVR from the network setup menu.
Local Name: Assign a name to easily recognize a DVR if you have more than one; I.E.: HomeDVR.
CMD Port: Enter the port number used on your router to stream video from the DVR; 7777.
Stream Type: Select Main Stream.
Enable Auto Logon: Click to allow NVClient to log into the DVR.
Channel Num: Select the maximum number of channels in the DVR.
User Name: Enter the user name used to log into the DVR.
Password: Enter the password used to log into the DVR.