Talos Security DK1400 Series Surveillance Kit User Manual - Manual (Page 31)

31
4.1.2.2 Common Setup Tab
Under server manage click on "Add" to enter the Add Server settings interface.
Server Type: Click to choose the DVR server type; select 37DVR.
Address: Enter the IP address of the DVR from the network setup menu.
Local Name: Assign a name to easily recognize a DVR if you have more than one.
CMD Port: Enter the port number used on your router to stream video from the DVR.
Stream Type: Select Main Stream.
Enable Auto Logon: Click to allow NVClient to log into the DVR.
Channel Num: Select the active number of channels in the DVR.
User Name: Enter the user name used to log into the DVR.
Password: Enter the password used to log into the DVR.
4.1.2.3 Setup Ex Tab
Enable Sync Time On Server Open: Check
On Start App, Auto Open Server: Check
On Check Camera: Select "Open Image at Free Position"
On Open Server: "Select Auto Open Camera"
Enable Back Connect: Check
Listen Port: Enter the port number used on your router to stream video from the DVR.
Click "Apply and then "OK" to return to the DVR live view.