Unisteer 8010720-02 Ford Faicon/Comet Power Rack & Pinion 1960-65 - Manual (Page 6)

pg. 6 655610
6. When you have replaced all four bolts with longer set, install four one-inch standoffs over bolts.
7. Install rack and pinion bracket assembly over four bolts and install flat washers and lock nuts
8. Install outer tie rod ends in knuckles and leave nuts loose. NOTE: the kit has been shipped with outer
tie rod ends for V8 spindles only. Please check the fit of your spindle taper. If you have I6 spindles
call to get the correct outer tie rod ends.