Alignment instructions – Unisteer 8010720-02 Ford Faicon/Comet Power Rack & Pinion 1960-65 User Manual
Page 9
Advertising
pg. 9
655610
5. Measure around pulleys to get the length of the new belt you will need to purchase.
6. Install new belt and set tension.
7. Install pressure line to port on top of power steering pump. Thread on and tighten fitting.
8. Install return line to side port on reservoir and tighten clamp.
9. Top off fluid and start vehicle. Check for leaks right away. If all is ok, make sure that the fluid is full
and turn steering wheel lock to lock to purge air from system.
10. Your vehicle will now require an alignment by a professional.
Alignment Instructions
Toe In: 0 - 0.125
Camber: O.E. Specs
Advertising
This manual is related to the following products: