UVP ColonyDoc-It Imaging Station - Manual (Page 27)

ColonyDoc-It Imaging Station 27
Step 2: Finish
The software will automatically
move to the second tab Step 2 of
2: Finish after Count is selected
in Step 1 of 2: Select classes.
To add or subtract zones, change
the slider buttons for shape
(circular to irregular) and size (1
pixel to 200 pixels) until all the
zones of interest are highlighted.
This window is a second means to
save settings into templates. Go
to the Templates section of this
manual for instructions on creating
templates.
Click Finish to exit the manual
count mode and view the results
table.
The software will redirect to the
initial screen and display the total
number of zones identified.
To view the analysis data for the
zones click onto Show Results
Window from the Main Tools
section of the Colony Count
module. A window appears that
provides information relating to the
classes, zones (listed as colonies),
statistics, and distribution of the
zones. In the report, users may
view the area and perimeter of the
zone.
To learn more about reporting
capabilities, go to the Reporting
Functions
section of this manual.