UVP ColonyDoc-It Imaging Station - Manual (Page 28)

ColonyDoc-It Imaging Station 28
Renumbering Colony/Zone Values
To enable easier statistical reporting of
each colony or zone, the values assigned
to each colony or zone may be
renumbered.
To renumber the values assigned to each
colony or zone click Recompute Colony
Labels under the Grid Analysis Tools.
NOTE: The plate must have already been
counted.
The Recompute Colony Labels function
will read the plate from left to right and
from top to bottom. So the colony (or
zone) labeled 1 will be seated at the left
and towards the top of the plate.
Before applying “Recompute Colony
Labels” function
After applying “Recompute Colony Labels”
function