Vicor 4kW MegaPAC-EL AC-DC Switchers - Manual (Page 27)

UG:108 vicorpower.com Applications Engineering: 800 927.9474 Page 27
Current Share Boards - Optional Feature (Cont.)
Specifications:
1. Power: 2-50 Vdc at 5 mA maximum.
2. Accuracy: +/- 1 mV between -Vout connections.
3. Output current when not trimming up: +/- 1 uA (VI-200/J00), +/-5 uA (Maxi).
4. Use 4 non-plated through holes with standoffs for mounting.
5. CSB01 MUST be used for current sharing VI-200/VI-J00 converters.
6. CSB02 MUST be used for current sharing Maxi converters .
Please note: The CSB is NOT intended for Hotswap Applications
Contact your Regional Applications Engineer at 1-800-927-9474 for additional information.
Figure 14. Cable Drawing
P1
24.0" +/- 1.0"
Power
T1
-V1
T2
-V2
Red, 22 AWG
Yellow, 22 AWG
Brown, 22 AWG
White, 22 AWG
Black, 22 AWG
1 2
3 4
5 6
1.74"
(44.2mm)
0.12"
(3.0mm)
1.500"
(38.1mm)
0.12"
(3.0mm)
0.900"
(22.9mm)
1.14"
(29.0mm)
0.13" (3.3mm) Dia Non
Plated thru hole 4
places
Molex CT43045F surface mountable
connector. .390" height above board.
Pin Description
1 P ow e r
2 T 1
3 - V 1
4 T 2
5 - V 2
6 No Connection
J1 Pinout
Figure 13. Mechanical Drawing
End of Life - Not Recommended for New Designs