WarmlyYours Infinity - Manual (Page 11)

4. OPERATION
Plug-In Model
With your Infinity Plug-In model secured to the wall and plugged into a
grounded outlet, you are now ready to enjoy your towel warmer. Use the ON/
OFF switch located on the bottom left side (when facing the towel warmer) to
control when you want the unit to warm. Refer to Diagram D for switch for
location.
Hardwired Model
WarmlyYours towel warmers include our programmable timer for
luxurious and economical use of the towel warmer.
On
Towel warmer runs at 100% power and will reach temperatures
between 100° F and 140° F depending on the following: running
time, number of towels, type of towels, and ambient room
temperature. For optimal use we recommend Automatic Mode.
Automatic Mode
Programmable Timer allows up to 14 events or two ON-OFF
cycles per day. Easy programming allows you to set intervals
of operation for each day of the week. To access programming
controls, flip the switch panel up. Refer to Diagram G for switch
location.
Manual Mode
Timer can be set to operate in manual mode to function as a
simple ON-OFF switch.
Warning
For optimum operation of your new towel warmer, we recommend placing
no more than two (2) towels at a time on the warmer. Place the towels in a
way to maximize the contact area between the towel and the towel warmer.
The towel will be its warmest when it is placed over the top bar. This allows a
greater portion of the towel to make the most contact with the warmer.
10
Diagram G