Rockwell Automation 20P PowerFlex DC Drive - Frame C AC Current Transducers User Manual
Page 4
Advertising
4
PowerFlex® DC Drive - Frame C AC Current Transducers
4. Disconnect the HIM Communication cable from the connector on the
upper right corner of the Control board and set the cover aside.
5. Remove the eight screws and washers that secure the plastic shields to
the bottom of the drive and remove the shields.
6. Remove the power wiring from the U and W Phase AC input power
terminals.
Pull tabs out
to disconnect
cable.
Remove screws and washers
Remove screws and washers
Advertising