Rockwell Automation 20P PowerFlex DC Drive - Frame C AC Current Transducers User Manual
Page 6
Advertising
6
PowerFlex® DC Drive - Frame C AC Current Transducers
3. Remove the two screws and washers that secure the bottom of the
Power Supply Filter circuit board to the drive chassis above the W
phase power terminal.
You must move the Control EMI shield that holds the Control board in order
to access other components within the drive.
4. Carefully disconnect the cables from connectors XFCD and XR on the
Control board.
Remove screws
Power Supply
Filter board
Disconnect
cables
Advertising