Rockwell Automation 20P PowerFlex DC Drive - Frame C AC Current Transducers - Manual (Page 9)

PowerFlex® DC Drive - Frame C AC Current Transducers 9
9. Remove the lower screw that secures the right side AC Current
Transducer to the W phase power terminal.
10. Move the EMI shield to the lowered position and remove the nuts and
washers that secure the wires to the side of each of the AC Current
Transducers (CTs) and remove the wires.
Remove screw and wire
Note: Left CT and Regenerative drive shown.
Remove
nuts,
washers
and
wires