Access drive control pod – Rockwell Automation 21G PowerFlex 750 Series Safe Torque Off User Manual
Page 16
Advertising
16
Rockwell Automation Publication 750-UM002F-EN-P - July 2013
Chapter 3
Installation and Wiring
Access Drive Control Pod
1. Remove drive cover.
Frames 1…5
– Squeeze locking tabs and pull out bottom of cover.
– Pull cover down and away from the chassis
Frames 6…7
– Loosen door screws.
– Gently pry the door open to remove.
Advertising
This manual is related to the following products: