Hardware enable jumper – Rockwell Automation 21G PowerFlex 750 Series Safe Torque Off User Manual
Page 21
Advertising
Rockwell Automation Publication 750-UM002F-EN-P - July 2013
21
Installation and Wiring
Chapter 3
Hardware Enable Jumper
When installing the Safe Torque Off option module, ensure the hardware enable
jumper (ENABLE) on the Main Control Board is installed.
PowerFlex 753 - ENABLE Jumper Location
PowerFlex 755 - ENABLE Jumper Location (Frames 1…7)
Advertising
This manual is related to the following products: