Barco R5976934 - Manual (Page 132)

12. Accessories
12-18 _________________________________________________________Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
12.6.2 Installation
The short ceiling mount is attached to the ceiling by means of 4 screws M8 (for specification of the screws, cf.
Required tools .). It is the same bracket for 42" and 47".
For drilling the holes in the ceiling, it is recommended to use a jig – take a sheet of paper
(A4) and copy the distances given in the drawing below.
• Drill 4 holes, 10mm, to the ceiling in the given distances!
• Attach the ceiling mounting plate.
• Attach the adjustable bar to the ball joint of the ceiling mounting plate by using one of the included screws
M10x60. Secure the screw with the nut and attach the black plastic cap. Also attach a black plastic cap to the
already installed parallel screw on the ceiling mounting plate.
• Slide in the adjustable bar into the monitor mounting plate of the short ceiling mount. Fix its position by one
of the included screws M10x60. Secure the screw with the nut and attach the black plastic cap.