Black level (only available for analog rgb) – Barco R5976934 User Manual
Page 52
Advertising
5. The On Screen Display (OSD)
5-10 __________________________________________________________Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
5.3.1.6 Black level (only available for analog RGB)
Black level can be adjusted in the range between 0 and 100.
The black level is the deepest black of the monitor.
RCU
Push button (1: top most)
• Use the up and down cursor keys to navigate to
the Black Level
• Press 5 and 6 to navigate to Black Level
• Use the left and right cursor keys to in-
crease/decrease the value in steps of 1
The current value is indicated.
• Use 3 and 4 to increase/decrease the value in
steps of 1
The current value is indicated.
The value is applied without any further action.
Advertising