Barco R5976934 - Manual (Page 53)

5. The On Screen Display (OSD)
Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008 ______________________________________________________________________________________ 5-11
5.3.2 Position
On the Position dialog, the vertical and horizontal position of the image can be set as well as an area for zoom-
ing defined.
RCU Icon Push button (1: top most)
• Press the ADJ key to activate the OSD • Press 7 to activate the OSD
• Use the left and right cursor keys to navi-
gate to the signal menu
• Press 3 and 4 to navigate to the
signal menu
• Press Enter to select • Press 2 to select
• Use the left and right cursor keys to navi-
gate to Position
• Press 3 and 4 to navigate to
Position
• Press Enter to select – or –
• Press the down key to activate the dialog • Press 2 to select – or –
• Press 5 to activate the dialog
The entries of Position are only enabled for the signal assigned to input 1.