Input selection with the function key f1, 8 input signal selection -41, 1 input selection with the function key f1 – Barco R5976934 User Manual
Page 86
Advertising
5. The On Screen Display (OSD)
5-44 __________________________________________________________Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
If no source is connected (neither no sync, no cable, no valid signal), the monitor switches to standby and dis-
plays the respective information:
Whenever one of these messages pop up, check the respective item and fix it!
5.8.1 Input selection with the function key F1
For input 1, the input can be selected using the function key F1. Pressing F1 "scrolls" through the inputs and
displays one after the other the respective icon.
Press Enter to directly select the desired input.
Advertising