Rockwell Automation 1606-XLE960MX-3N Power Supply Reference Manual - Manual (Page 14)

All parameters are specified at 48V, 20A, 3x480Vac, 25°C ambient and after a 5 minutes run-in time, unless noted otherwise.
14 Rockwell Automation Publication 1606-RM025A-EN-P — April 2014
Bulletin 1606 Switched Mode Power Supplies
\
Product certification information (including Certificates and Declarations of Conformity) can be found at www.ab.com/certifications .
19. Certifications
UL 508
IND. CONT. EQ.
18WM
LISTED
LISTED E56639 for use in the U.S.A. (UL 508) and Canada
(C22.2 No. 14-95)
UL 60950 RECOGNIZED E1168663 for use in the U.S.A. (UL 60950-1)
and Canada (C22.2 No. 60950)
Information Technology Equipment, Level 3
EN 60950-1, EN 61204-3 Complies with CE EMC and CE Low Voltage Directives
Marine RINA RINA (Registro Italiano Navale) certified. See below for link
to the Certificate.
GOST R
GOST R certification is applicable for products intended for sale and use
within Russia. See below for link to the Certificate.
C-TICK C-Tick compliance is for products intended for sale and use within
the Australian market. See below for link to the C-Tick Declarations
of Conformity.
20. Environmental Compliance
The unit does not release any silicone and is suitable for use in paint shops.
Electrolytic capacitors included in this unit do not use electrolytes such as Quaternary Ammonium Salt Systems.
Plastic housings and other molded plastic materials are free of halogens.
The materials used in our production process do not include the following toxic chemicals:
Polychlorinated Biphenyl (PCB), Pentachlorophenol (PCP), Polychlorinated naphthalene (PCN), Polybrominated
Biphenyl (PBB), Polybrominated Biphenyl Oxide (PBO), Polybrominated Diphenyl Ether (PBDE), Polychlorinated
Diphenyl Ether (PCDE), Polybrominated Diphenyl Oxid e (PBDO), Cadmium, Asbestos, Mercury, Silica