Saving a file, Plotting a file – Rockwell Automation 1492 WinABMS Marking System Software User Manual
Page 35
4-8 Using WinABMS Software
To duplicate a marker card
1. Select the card that will be duplicated.
2. Select the duplicate card under the edit heading.
Note: The duplicate card will be placed in the next open holder location.
Saving a File
To save a file:
1. Click on Save under the File heading or click on the Save Tool.
To save a file under a new name:
1. Click on Save As under the File heading
.
2. When the Save As Menu appears, name the file and select the drive and
folder into which you wish to save the file
.
3. Click OK.
Plotting a File
To plot an entire file:
1. Insert the appropriate spacers in the base plate locations where you wish
to plot
.
2. Insert the marker card on top of the spacer
.
Note: Insert the 2 middle pins first, then insert the 4 corner pins. To remove
marker cards, pull up the 4 corners first, then pull up the 2 middle pins.