Editing a custom marker card geometry – Rockwell Automation 1492 WinABMS Marking System Software User Manual
Page 43
Custom Marker Card Geometries 6-3
4. Click on the desired geometry.
5. Click OK.
Editing a Custom Marker
Card Geometry
This section describes how to edit a Custom Marker Card Geometry.
To edit a Custom Marker Card Geometry:
1. Double Click on the GeoEdit icon.
Note: You must completely exit from WinABMS before starting GeoEdit.
2. Click on Open under the File heading or click on the Open Geometry
Tool.
3. When the Open Geometry Menu appears click on the database which
contains the desired geometry
.
4. Click on the desired geometry.
5. Click OK.
6. Click on Base Plate under the Edit heading or click on the Base Plate
Tool if you desire to change the base plate (new geometries will have
Allen-Bradley WinABMS as their default base plate setting).
7. When the Choose Base Plate Menu appears, select the desired base
plate.