Rockwell Automation 1329I Integrated AC Drive/Motor, Series A - Manual (Page 7)

1329I-5.0 Integrated Drive/Motor — January, 1999
Chapter
1
Step 1 - Identify Your Unit
The 1329I integrated drive/motor is an AC drive integrally mounted with an inverter
duty motor. Each unit consists of a Drive Section and a Motor Section.
The Drive Section is a single- or three-phase input, three-phase output inverter providing
open loop V/Hz regulation. It houses the PC boards and the blower. The Motor Section
is a four-pole, three-phase induction motor.
The unit’s default setup suits a wide range of applications. Two rotary switches and a
10-position slide switch on the Control board are used to adjust the setup, if required.
1329I units are identified by catalog number. This number appears on the shipping label
and on the unit’s nameplate. Table 1.1 shows the format of this number and what it
indicates.
Table 1.1
Catalog Number Format
Standard units, described in Section 1.1, provide remote operator control.
Local operator control units, described in Section 1.2, provide local control.
1329I – B M 001 18 BC A – A D
Speed
Range
B 20:1
Voltage
Rating
J 115V
K 200-230V 1-
∅
L 200-230V 3-
∅
M 380-460V
Horsepower
Rating
001 1
002 2
003
3
005 5
Base
Speed
18 1800 RPM
Enclosure
Design
BC Totally Enclosed
Blower Cooled
Display
Options
A Local Control
B Display Only
Options ➊
D DeviceNet
Com Card
F CE Filter Card
Motor
Frame Size
(All with C-Face
and Foot Mount)
A 56 Frame
B 140 Frame
C 180 Frame
➊ Select one, either D or F only, not both.