BenQ AWL-700 - Manual (Page 15)

BENQ Corporation
11
Select the TX Rates set among the following options, (1 – 2 - 5.5 - 11 Mbps) or (1 - 2
Mbps).
Preamble Type – Preamble is the first sub field of PPDU, which is the appropriate
frame format for transmission to PHY (Physical layer). There are two options, Short
Preamble and Long Preamble.
3.1.5 Remote Control Parameters
AWL700 provides some remote control features to help user’s remote management
for AWL700. In this configuration tags, you can set up a dedicated remote host to
control your AWL700, reject or accept “Ping” packets from the Internet, and set up the
listening port of AWL700’s built-in web server.
Remote Control IP – AWL700 can be managed by a dedicated host, which is located
anywhere in the Internet, if you fill a host’s IP address into this input field. Please note
that if you have configured this feature, you could not manage your AWL700 by any
host, which IP address is not that one in Remote Control IP input field.
Ping Reply – If you would not like to let your AWL700 respond to “Ping” packets
from the Internet, you can disable the “Ping Reply” or you can enable this feature to
reply “Ping” packets.
HTTP Public Port – In AWL700, it has a built-in web server to process all
configurations through web browsers. Its default listening port is 80, however, you can
assign the other port number to instead 80. It is useful if you also have a web server in
your LAN interface and would like to set up it to be a web virtual server.
3.2 Information
3.2.1 Statistics
This configuration page can bring traffic information to user who has the idea to know
the quantity of received or transmitted Ethernet and Wireless packets in AWL700. You
can see the number of received or transmitted packets and bytes count. This
information will be dynamically changed and be updated every three seconds.