BenQ AWL-700 - Manual (Page 17)

BENQ Corporation
13
3.3.1 DNS Setup
In “DNS Setup” page, user can input two DNS servers that AWL700 can use these two
servers to complete its DNS relay function. Please note that the DNS relay is a default
setting in AWL700, however AWL700 will choose ISP’s DNS server to be the first
choice to relay its DNS packets if user use PPPoE or DHCP client to connect to
Internet. These two DNS server are to be the second and third priority to relay DNS
packets by AWL700.
DNS Name Server 1 – First backup DNS server. Since we use the DNS server
offered by ISP to be the first choice to complete DNS relay function.
DNS Name Server 2 – Second backup DNS server.
3.3.2 DHCP Setup
3.3.2.1 DHCP Clone MAC Address
AWL700 provides “MAC clone” function to let users change their WAN MAC address.
This feature is provided for authentication purpose if your ISP would like to ask you to
offer this information.
Host Name – Your host’s name.
MAC Address – MAC address that you want to change in your WAN interface.
Generally, this MAC address will be the authenticated information to offer to your ISP
or NSP.
3.3.2.2 DHCP Server Parameters
AWL700 can act as a DHCP server in user’s LAN interface. It can make users to
acquire their IP addresses without doing a lot of configuration. AWL700 can offer hosts
parameters that are shown below.