BenQ AWL-700 - Manual (Page 7)

BENQ Corporation
3
Chapter 2. Hardware Installation
This chapter will describe how to set up AWL700 step by step. After you have set
up your AWL700 device, then you may need to configure your WAN setting to match
the mode that you have applied from your ISP or NSP.
2-1 Product Kit
Before installation, make sure that you have the following items:
AWL700 Wireless LAN Router
Software CD containing user manual and utility
Quick Start Guide
RJ-45 cable
Power adapter
Metal stand
Screw pack
Warranty card
2-2 System Requirements
Before using your AWL700, please check that you have the following required items:
Broadband access device (ADSL/cable modem) or Office LAN
UTP Cat-5 cable for linking ADSL/cable modem/LAN and the AWL500
Wireless LAN PC card (AWL100) or USB adapter (AWL300)
Web browser (Internet Explorer 5.0 or higher, or Netscape Navigator 6.2 or
higher)