BenQ AWL-700 - Manual (Page 20)

BENQ Corporation
16
Protocol – Which protocol type does the server provide?
Service Name – 10 characters to name this service
Port Number – The port, which is opened to others in the Internet side.
Server IP Address – The server’s private IP address in the LAN side
Server Port Number – The port of which the inside server is listening
3.3.3.2 Dynamic NAT
In the first table, you can assign a range of private IP addresses that can be converted to
public ones.
Base Address – The first IP address that you wish to be converted.
Number of Address – Limits the range that configured by users. If you have five hosts
to be converted to public IP addresses, you can limit this range to 5.
In the second table, you can assign a range of public IP addresses that wait to be mapped