BenQ AWL-700 - Manual (Page 18)

BENQ Corporation
14
Default Gateway – Tell hosts where they can deliver their packets if they do not
know how to deal with those packets. In fact, it should be the AWL700 itself.
Netmask – Tell hosts their netmask.
Name Server 1, 2, 3 – AWL700 will offer DNS server to its hosts to help hosts
activate their DNS function. Since AWL700 has DNS relay function, it offers hosts itself
to be a default name server.
DHCP Start IP – You can assign the first IP address of DHCP.
DHCP End IP –You can assign the End IP address of DHCP.
3.3.2.3 Table of fixed host entries
DHCP server can assign IP addresses and some options, such as gateway’s IP address,
DNS server, etc., to hosts in AWL700’s LAN interface. Usually, DHCP server assigns IP
addresses dynamically. However, users can assign MAC address and IP address to be
one pair. When DHCP server receive request from that host which MAC address is
one of those pairs in its mapping table, DHCP server will assign that mapping IP address
to host.
3.3.3 NAT/DMZ Setup