BenQ AWL-700 - Manual (Page 24)

BENQ Corporation
20
Then enter the 4 WEP keys in the Key 1, Key 2, Key 3 and Key 4 entry filed. Select one
WEP key as an active key before enabling use of encryption
3.3.6 Access Control
The Access Control Table enables you to restrict wireless stations accessing the
Wireless Access Points by identifying the MAC address of the wireless devices.
Use the following buttons to manage the Access Control Table:
Enable – allow network access from stations in the list
Change – to change and add the entries in the table if you enter the incorrect MAC
address
Reverse Access – Change to Enable for reverse access (Only those Mac Address in the
table are prohibited )
The WEP key must be set up exactly the same on the Wireless
Access Points as they are on the wireless client stations. If you use Key 1 on
the Wireless LAN Access Point, the same value must be assigned to Key 1 for
all client stations.
NOTE