Rockwell Automation 1770-M12 Mass Storage Systems - Manual (Page 18)

Installing Your Mass Storage System
Chapter 3
3Ć3
Figure 1.4
Connect the Mounting Bracket to the Handle
FlatĆhead
Machine
Screws
Mounting
Bracket
Handle
11959
Figure 1.5
Sure the Mounting Brackets with SelfĆtapping Screws
Side View
of
Mass Storage System
SelfĆtapping
Screws
11960
Table Top Mount
We place protective feet on the bottom of each mass storage system. This will
guard the mass storage system against slippage while it is on your table or desk
top.
When you place your system on the table, be sure that it is level and allow four
inches of clear space between the mass storage system and the wall. The fan
circulates filtered air to cool your mass storage system.