Removing the finger-safe terminal block – Rockwell Automation 1769-OF4CI CompactLogix 1769-OF4CI Module User Manual
Page 15
Advertising
Compact 1769-OF4CI Isolated Analog Output Module 15
Rockwell Automation Publication 1769-IN075B-EN-P - August 2010
Removing the Finger-safe Terminal Block
To remove the terminal block, loosen the upper and lower retaining screws. The
terminal block will back away from the module as you remove the screws. When
replacing the terminal block, torque the retaining screws to 0.46 N
•
m
(4.1 in•lb).
Item
Description
1
Wiring the finger-safe terminal block
2
Lower retaining screws
3
Upper retaining screws
1
3
2
Advertising