System assembly – Rockwell Automation 1769-OF4CI CompactLogix 1769-OF4CI Module User Manual
Page 7
Compact 1769-OF4CI Isolated Analog Output Module 7
Rockwell Automation Publication 1769-IN075B-EN-P - August 2010
System Assembly
The module can be attached to the controller or an adjacent I/O module before
or after mounting.
•
For mounting instructions, see
Panel Mounting on page 10
, or
DIN Rail
Mounting on page 11
.
•
To work with a system that is already mounted, see
Replacing a Single
Module Within a System on page 11
.
The following procedure shows you how to assemble the Compact I/O system.
1.
Disconnect power.
2.
Check that the bus lever of the module to be installed is in the unlocked
(fully right) position.
Item
Description
Item
Description
1
Tongue-and-groove slots
4
Bus lever
2
Bus connectors
5
End-cap terminator
3
Positioning tab
6
End-cap bus terminator
6
5
4
3
1
1
2