Hazardous location considerations – Rockwell Automation 1769-OF4CI CompactLogix 1769-OF4CI Module User Manual
Page 25
Compact 1769-OF4CI Isolated Analog Output Module 25
Rockwell Automation Publication 1769-IN075B-EN-P - August 2010
Hazardous Location Considerations
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D or
non-hazardous locations only. The following ATTENTION statement applies
to use in hazardous locations.
Specification
1769-OF4CI
System Power Supply Distance Rating
The module may not be more than 8 modules
away from the system power supply.
Recommended Cable
Belden 8761 (shielded)
Vendor I.D. Code
1
Product Type Code
10
Product Code
45
Input Words
6
Output Words
5
Configuration Words
32
WARNING: EXPLOSION HAZARD
•
Substitution of components may impair suitability for Class I,
Division 2.
•
When in hazardous locations, turn off power before wiring or
replacing modules.
•
Do not disconnect equipment unless power has been switched off
or the area is known to be non-hazardous.
•
This product must be installed in an enclosure.
•
All wiring must comply with N.E.C. article 501-4(b).