Rockwell Automation 1769-OF4CI CompactLogix 1769-OF4CI Module - Manual (Page 19)

Compact 1769-OF4CI Isolated Analog Output Module 19
Rockwell Automation Publication 1769-IN075B-EN-P - August 2010
Configuration Data File
The manipulation of the bits from this file is normally done with programming
software (for example, RSLogix 500 software or RSNetworx for DeviceNet
software) during initial configuration of the system. In that case, graphical
screens are provided by the programmer to simplify configuration.
However, some systems, like the 1769-ADN DeviceNet Adapter, also allow the
bits to be altered as part of the control program, using communication rungs. In
that case, it is necessary to understand the bit arrangement. The channel
configuration words, the first two words of each eight word group, are described
on page
20 . Refer to your module’s user manual for additional details.
Word Description Word Description
0 Channel 0 Configuration Word 0 16 Channel 2 Configuration Word 0
1 Channel 0 Configuration Word 1 17 Channel 2 Configuration Word 1
2 Channel 0 Fault Value Word 18 Channel 2 Fault Value Word
3 Channel 0 Program Idle Mode
Word 19 Channel 2 Program Idle Mode
Word
4 Channel 0 Low Clamp 20 Channel 2 Low Clamp
5 Channel 0 High Clamp 21 Channel 2 High Clamp
6 Channel 0 Ramp Rate 22 Channel 2 Ramp Rate
7 Channel 0 Spare 23 Channel 2 Spare
8 Channel 1 Configuration Word 0 24 Channel 3 Configuration Word 0
9 Channel 1 Configuration Word 1 25 Channel 3 Configuration Word 1
10 Channel 1 Fault Value Word 26 Channel 3 Fault Value Word
11 Channel 1 Program Idle Mode
Word 27 Channel 3 Program Idle Mode
Word
12 Channel 1 Low Clamp 28 Channel 3 Low Clamp
13 Channel 1 High Clamp 29 Channel 3 High Clamp
14 Channel 1 Ramp Rate 30 Channel 3 Ramp Rate
15 Channel 1 Spare 31 Channel 3 Spare