Wire the controlnet adapter, Tnc cables, 1738-acnr auxiliary power – Rockwell Automation 1738-ACNR ArmorPoint ControlNet Adapter, Series A User Manual
Page 7
Advertising
Publication 1738-IN016B-EN-E - March 2005
ArmorPoint ControlNet Adapter, Series A 7
Wire the
ControlNet Adapter
Following are wiring instructions for the ArmorPoint ControlNet
adapter.
TNC Cables
• Connect TNC cables to Channel A or B for single media.
• Connect TNC cables to Channel A and B for redundant media.
1738-ACNR Auxiliary Power
ATTENTION
Make sure all connectors and caps are securely
tightened to properly seal the connections against
leaks and maintain IP67 requirements.
(view into connector)
Pin 1 -
User Power +
Pin 2 -
Adapter Power +
Pin 3 -
Adapter Power -
Pin 4 -
User Power -
43587
Male In Connector
Advertising