Rockwell Automation 1734-AENTR POINT I/O 2 Port EtherNet/IP Adapter User Manual
Page 21
POINT I/O 2 Port Ethernet Adapter 21
Publication
1734-IN040B-EN-P - December 2009
Power Supply
Attribute
Value
Input voltage rating
24V DC nom
10…28.8V DC range
Field side power
requirements
24V DC @ 400 mA nom
12V DC @ 800 mA nom
10…28.8V DC, 1000 mA max
Inrush current
6 A max for 10 ms
Input overvoltage protection
Reverse polarity protected
PointBus output current
0.8A max @ 5V DC
Interruption
Output voltage stays within specifications when input drops
out for 10 ms at 10V with max load
Ethernet Communication
Attribute
Value
Ethernet communication
rate
10/100 Mbits/s, half or full-duplex
Ethernet ports
2 - configured as Embedded Switch
Ethernet network topologies
supported
Star, Tree, Daisy chain/Linear, and Ring
Ethernet connector
RJ-45, Category 5
Ethernet cable
Category 5: shielded or unshielded
Ethernet wire connections