Bosch Single Door - Manual (Page 29)

29
1.
2.
3.
q Remove the cap from the appliance connection 1.
q Bend the water pipe according to the location of the
connection on the appliance 2.
q Push the union nut and seal onto the water pipe.
q Push the end of the water pipe into the appliance
connection and screw on the union nut 3.
Tighten handĆtight.
q Using the openĆended wrench, tighten the union
nut. Do not overturn!
q Open the shutĆoff valve and main water tap.
Check the connection on the shutĆoff valve and
on the appliance for leaks.
16. Attaching the toe kick panel
d CAUTION d
The maximum height of the toe kick panel is 4" from
the top of the floor. Do not cover ventilation slots in
the base panel. Risk of damage to the appliance.
q If required, cut the toe kick panel to the required
length.
q Attach the base panel to the appliance.
q Remove the protective film from the adhesive pads
on the Velcro.
q Fit the toe kick panel to the base panel and press
firmly into place.