Bosch Single Door - Manual (Page 30)

30
q Put on the base panel (do not screw on) and
measure the difference in depth Y between the base
panel and toe kick panel of the adjacent furniture.
q Remove the base panel.
q Loosen the brackets for attaching the base panel
and push in all the way.
q Pull out the brackets by the measured amount Y.
q Screw the brackets tightly.
q Attach the base panel.
i If required, the toe kick panel can be screwed to the
base panel. There are screw holes in the base panel
near the Velcro.
17. Commissioning the Appliance
To guarantee the accuracy of the following working
steps and thus the appearance of the overall kitchen
front later on, the appliance should now be operated.
q Open the appliance door.
q Press the POWER button.
Only for appliances with a water connection:
! NOTE !
In order to avoid the risk of damage caused by
leaking water from damage possibly caused to the
water pipe feeding the appliance, keep the shutĆoff
valve closed.