Aligning the icećwater dispenser – Bosch Single Door User Manual
Page 38
38
SideĆbyĆSide installation only:
q Insert the cover strip into the space between the
appliances.
Individual appliances only:
B
A
A
Appliance
B
Furniture
q Screw on the brackets (side) for holding the cover
strip.
q Insert the cover strip into the space between the
appliance and the wooden panel.
26. Aligning the iceĆwater
dispenser
(for freezer unit with iceĆwater dispenser only)
The depth of the iceĆwater dispenser can be aligned
inside the cutout of the furniture door. This allows the
dispenser to be aligned parallel to the furniture door in
order to obtain an optimum overall appearance.
q Remove covers.
q Loosen screws on the 4 clamps.
q Insert flat screwdriver into one of the 4 slots and
push the blocks sideways until the iceĆwater
dispenser are the same distance from the furniture
door.
q Retighten the screws on the clamps.