Installation location, Warning, Installation room – Bosch Single Door User Manual

Page 7: Installation cavity, Furniture/fixtures, Base

Advertising
background image

7

Installation location

1.

d

WARNING

d

Do not install the appliance:
- outdoors,
- in an environment with dripping water,
- in rooms which are at risk of frost.

Appliance is very heavy ć for empty weight see the
following table:
Refrigerator 24"

approx. 310 lbs / 140 kg

Refrigerator 30"

approx. 350 lbs / 158 kg

Freezer 18"

approx. 255 lbs / 115 kg*

Freezer 24"

approx. 300 lbs / 135 kg*

Freezer 30"

approx. 335 lbs / 150 kg*

Wine unit 18"

approx. 300 lbs / 135 kg

Wine unit 24"

approx. 360 lbs / 160 kg

(* without Water Dispenser)

Installation room

The appliance should be installed in a dry, ventilated
room.

The ambient temperature should not drop below 55 °F

(13 °C) or rise above 110 °F (43 °C), otherwise

malfunctions may occur.

The installation location should not be exposed to direct
sunlight and not placed near a heat source, such as an
oven, radiator, etc. If installation next to a heat source is
unavoidable, use a suitable insulating plate or observe
the following minimum distances from the heat source:

-

1

1

/

4

" (30 mm) from an electric cooker,

-

12" (300 mm) from an oil or solidĆfuel cooker.

Installation cavity

It is important to observe the specified dimensions of
the installation cavity for a troubleĆfree installation of the
appliance and for the subsequent general view of the
furniture front.

i

In particular ensure that the cavity is square.

Squareness can be checked by suitable means,
e.g. spirit level, diagonal measurements, etc.

i

The side walls of the cavity must be flush.

The minimum thickness of side walls and the top wall
must be

5

/

8

" (16 mm).

The minimum thickness of toe kick panel must be

1

/

2

" (13 mm).

A thickness of ¾" (19 mm) is recommended.

Furniture/fixtures

The new appliance is screwed securely to adjacent
and overhead furniture/fixtures.

For this reason it is essential that all attachable
furniture/fixtures are connected securely to the
base or the wall by suitable means.

Base

d

WARNING

d

A fullyĆload appliance is very heavy ć for the
loadĆbearing capacity at least see the following table:
Refrigerator 24"

approx. 890 lbs / 400 kg

Refrigerator 30"

approx. 1110 lbs / 500 kg

Freezer 18"

approx. 560 lbs / 250 kg*

Freezer 24"

approx. 780 lbs / 350 kg*

Freezer 30"

approx. 950 lbs / 425 kg*

Wine unit 18"

approx. 550 lbs / 245 kg

Wine unit 24"

approx. 694 lbs / 310 kg

(* without Water Dispenser)

To ensure that the appliance is installed securely and
functions properly, the base must be flat and level.

The base must be made of a hard, rigid material.

The installation area must be the same height as the rest
of the room.

On account of the heavy weight of a fully loaded
appliance, a loadĆbearing base is required. If in doubt,
contact an architect or a building expert.

Advertising