Shorten the finger guard, Attaching the finger guard – Bosch Single Door User Manual
Page 36
36
i
The number of lower brackets depends on the width
and the design of the furniture door.
23. Shorten the finger guard
!
IMPORTANT NOTE
!
The finger guard must cover the entire height of the
door. If doors exceed the standard height, use the
extra long finger guard (see "Optional accessories").
q Hold the finger guard at the side of the open door.
i
The recesses on the finger guard must be situated
exactly at the height of the brackets!
q Transfer the door dimensions to the finger guard.
q Using a knife and steel ruler, shorten the finger
guard to the required length.
24. Attaching the finger guard
q Insert the finger guard into the gap between the
appliance and adjacent furniture (
1.).
q Clamp the finger guard under the brackets (2.).
q Push the cap onto the bracket and screw tightly.